Don't Wait Till Its Too Late...Call The Honest Plumber!
The drip, drip from your faucet is an indication that there is something wrong with it. Your first instinct may be to ignore it, but a dripping faucet can lead to a lot of wasted water over time. Plus, it can raise your water bill and damage your plumbing fixtures. In this blog post, we will discuss the eight reasons why your faucet is dripping and how you can fix it. While there may be some quick fixes, the best solution is to call an experienced plumber in Atlanta to ensure the problem is fixed properly.
8 Reasons for a Dripping Faucet
- Worn-out washers:
The most common cause of a dripping faucet is a worn-out washer. The washer is a small rubber or metal piece located at the end of the faucet stem, and it is responsible for creating a watertight seal. Over time, the washer can become worn out or damaged, causing water to leak out of the faucet. To fix this issue, you will need to replace the worn-out washer. If you have experience with DIY plumbing, you can attempt this yourself. However, it's always a good idea to call a plumber to ensure it's done properly.
2. Loose parts:
A loose part can also cause your faucet to drip. If you notice that your faucet handle is wobbly or loose, it's likely that a part is loose. This can be a relatively easy fix if you can identify which part is loose. However, if you're not sure, it's best to call a plumber. They will be able to determine which part is loose and tighten it to stop the dripping.
3. Corroded valve seat:
The valve seat is part of the faucet that connects the spout and the faucet body. It can become corroded over time, which allows water to seep through the metal and cause a drip. To fix this issue, the valve seat will need to be cleaned or replaced. A corroded valve seat is more likely if your faucet is quite old. This can be a bit more complicated than replacing a washer, so it's best to call a plumber to handle this task.
4. Broken cartridge:
If you have a single-handle faucet, the issue may be a broken cartridge. The cartridge controls the flow of water, and if it's broken, water will leak out of the faucet. You will need to remove the faucet handle to access the cartridge. If you have experience with DIY plumbing, you can replace the cartridge yourself. However, if you're not confident in your abilities, it's best to call a plumber.
5. A loose handle:
One of the most common reasons for a leaking faucet is a loose handle. If the handle is not tightened properly, water can seep out around it and cause a leak. To fix this problem, simply tighten the handle with a wrench or pliers.
6. High water pressure:
Does your area have a high water pressure? When water flows through the pipes at high pressure, it can cause wear and tear on the faucet, leading to leaks. A pressure-reducing valve can be installed to fix this issue. However, this is a job for a plumber as it requires access to the main water line.
7. An incorrect installation:
If you have recently installed a new faucet and its dripping, the most likely reason is incorrect installation. If the faucet was not installed properly, it may not be seated correctly and cause water to leak out. To fix this problem, you will need to remove the faucet and reinstall it correctly.
8. A faulty diverter:
The diverter is a small valve that controls the flow of water from the spout to the sprayer or other outlet. If it is not functioning properly, water can leak out through it. To fix this problem, you will need to replace the diverter.
There are a few reasons why your faucet may be dripping. While there may be some quick fixes, it's always best to call an experienced plumber in Atlanta to ensure the problem is fixed properly. Not only will they be able to identify the cause of the drip, but they can handle any necessary repairs in a timely and efficient manner. Don't let a dripping faucet waste water and money - call a plumber today.
